2020 Good Quality Din Pn16 Gate Valve - Cast Iron Gate Valve GV-H-10 – Deye

Quick Detail
Design standard: DIN/BS/ANSI EN558 /SABS
Body material: Cast iron, ductile iron
Wedge: Ductile iron+ Brass/Bronze/Stainless steel
Nominal diameter: 2″, 3″, 4″6″ 8″
Pressure: PN25
End connection: RF. Flange
Face to face: DIN EN1711, BS5163 ANSI
Working temperature: -30℃~+300℃.
Test and inspection: API 598.
Gland Gate valve
Product Range Size: 2″-1200″
Connection: Flange ends conform to EN1092-1

Features
•PN10/PN16/PN25 Metal Seated Gate Valve is operating by the brass/bronze/stainless steel welded on iron wedge
• Moving perpendicular to the flow axis through a worm machined stem multi turned
• Tight sealing is achieved on leakage grade A/B The fusion bonded epoxy coated flow surface
• In each time the valve is opened, the flow on the line cleans the sealing surface, Prevents from dirt and deposits
• With its standard installation length, easy to replace the old equipment.
• It has ductile iron body and stainless steel stem
• Inner and outer surfaces are coated with minimum 250 microns fusion bonded epoxy
• Suitable to install actuator and gearbox
• Suitable to use with ground and underground applications. Can be operated with extension spindle
• Very low head loss rating. Can be operated with lower torque ratings, no maintenance needed